Electric basket front cross member located in the linkage of the front bracket, and the bracket of the saddle and the front cross beam is connected with the two M14bolts, the front bracket lifting part support on two M14bolt support. Front beam and the front supporting frame of the two M14bolts if can even force bearing chain, from look forward, electric basket the force chain does not have the problem. But affected by the processing accuracy constraints, the two bolts of actual stress is only M14a bolt load. Due to safety rope and the basket frame connection, because the rope with a diameter of not less than13mm diameter wire rope length is arranged. It is safe to use safety rope, which makes the electric basket with security safeguard.
Electric basket using wire rope around a basket frame bottom and the safety rope clamping(at least 4BUCKLE)each card once left not greater than1m lifting weight, basket case from bearing wire rope or wire chain bar shedding, safety rope hanging basket frame plays the role of. If using the reinforced rod chain load-bearing suspender, then put the safety rope and reinforced bar chain hanging in the fixed roof beam, and then, the chain hanging on a steel link chain bar lower hanging electric basket, using the chain lift. Because the chain travel limited, therefore in the lifting process, has to replace the chain, the chain of artificial lift, so the relay lifting.